Garage Floor Epoxy in Beaumont, CA

Why bare garage floors wear out here

Garage concrete in Beaumont faces a mix of problems that most slabs in milder places do not. The wind through the pass drives fine grit under the door, and every time you drive in, your tires grind that grit into the surface. Strong sun heats the slab near the door, and cool nights shrink it again. Over a few years the top layer gets weak and powdery. Oil drips, coolant and fertilizer stains soak in and never come out. A good epoxy floor seals all of that off.

A lot of the floors we redo had a store-bought kit on them first. Those kits go on thin and do not bond well to smooth garage concrete. When hot tires sit on them after a drive on the freeway, the softened coating can stick to the rubber and pull away. That is called hot tire pickup, and it is the most common failure we see.

What makes our floors last

The difference is in the prep and the materials.

• Diamond grinding. We grind the whole floor to open the surface. Acid etching, which many kits rely on, does not do the job as well and leaves residue behind.
• Moisture testing. We test before we coat. If the reading is high, we use a primer that can handle it.
• Real repairs. Cracks and pits are filled with repair material and ground smooth, not just painted over.
• High-solids epoxy. Our base coats are thick and soak into the concrete to form a mechanical bond.
• UV-stable topcoat. Epoxy alone can yellow in the sun. Our topcoats hold their color and add scratch resistance.

Step by step

1. We clear and protect walls, doors and the water heater area.
2. We grind the slab and vacuum the dust.
3. We fill cracks, pits and expansion joints.
4. We apply a primer or base coat.
5. If you choose it, we add flake or a color accent.
6. We roll on a clear topcoat with grip.
7. We clean up and go over care with you.

Choosing a look

Solid gray is the most popular choice for a clean, modern garage. It brightens the space and makes dropped bolts easy to find. Tan and beige tones suit the warm stucco colors of many homes in town. If you want a floor that hides grit and tire marks, a flake floor is the better fit, and we cover that on our epoxy flake flooring page. Some customers like a solid floor with a light sprinkle of flake for a little texture.

Garages in newer neighborhoods

Most of the garages we coat in Beaumont are in homes built in the 2000s and later. The slabs are usually in good shape but very smooth. That smooth finish is exactly why coatings fail on them without grinding. These floors grind quickly and give us a great surface to bond to. Many of them have three-car layouts or a tandem bay, and we can coat everything in one visit.

Older garages

Older homes often have smaller garages with years of stains, past paint jobs and cracks. We grind off old coatings and treat oil stains so they do not bleed through. Bigger cracks get repaired before we coat, and we will tell you up front if any will show as a faint line after the floor is done.

Caring for your floor

Sweep or dust mop often, especially after windy days. Mop with warm water and a mild cleaner. Wipe up oil, brake fluid and other spills when you see them. Use a mat under any car that drips, and pads under jack stands and heavy toolboxes. Avoid harsh acids and strong solvents.

• Light foot traffic: usually the next day.
• Parking: two to three days for epoxy, depending on the weather.
• Heavy loads: about a week.

Questions we hear a lot

Want to see what your floor needs? Book a free estimate. If a basic sealer is enough, we will tell you.